2015 JEEP Wrangler Sahara

Received 15/01/2019

Defect: Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.

Consequence: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.

Received 26/09/2019

Defect: Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.

Consequence: A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.

Remedy: FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.

Received 11/05/2016

Defect: Chrysler (FCA US LLC) is recalling certain model year 2011-2016 Right Hand Drive Jeep Wrangler vehicles manufactured February 16, 2010, to May 2, 2016. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.

Consequence: Failure of the air bag circuit may prevent the driver's frontal air bag from deploying in the event of a crash, increasing the risk of injury.

Remedy: Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on August 11, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S40.

Incident 10/30/2025 · Filed 08/18/2026

In October 2025, the Anti-lock Breaking System (ABS) Brake, traction control, downhill control indicators all illuminated. This also impacts cruise control and acceleration from a stopped position. My repair technician placed an order for the necessary ABS control module with MOPAR. The expected delivery date was August 2026. In August 2026, MOPAR informed them the part was on a nationwide back order with no ETR for resolution. I placed an order for the ABS Module in August 2026, with a suggested date of delivery in two weeks. MOPAR has advised us today 18 August 26, there is no ETR for this critical component to be available. Anti-lock brakes are federally mandated in all vehicles 2012 and beyond. Not having this module disables multiple required safety components in the vehicle not just ABS and puts the consumer, other drivers at risk.

Incident 07/15/2022 · Filed 08/11/2026

I am contacting you to report a serious safety and parts availability issue involving my 2015 Jeep Rubicon. Jeep is no longer making the ABS module for my vehicle available and I have been unable to obtain a replacement module anywhere else. This has been an ongoing issue for several years now. The ABS system is an important safety component, and without a functioning ABS module, the vehicle can not be driven safely. What is particularly concerning is that Jeep has effectively left owners with no reasonable way to repair this critical safety system. This is not a consmetic or convenience related part. The ABS system directly affects the vehicle's ability to brake safely, particularly during emergency braking or when traction is compromised. I would like NHTSA to investigate whether Jeep's failure to make replacement ABS modules available for these vehicles creates an unreasonable safety risk for owners. I also believe NHTSA should determine whether Jeep should be required to provide a remedy, replacement parts or other means of restoring the ABS system to safe operating conditions. Please let me know what additional information is needed to formally document this saftety complaint. Concerned for my safety and the safety of my family, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Incident 07/28/2026 · Filed 08/07/2026

I was driving our 2015 Jeep Wrangler on the highway probably going around 60MPH and had a deer run in front of her and had to brake suddenly. The jeep skidded and fish taled slightly before coming to a complete stop and I avoided hitting the deer. The ABS system did not work. Ironically, the ABS and Traction Control lights had come on occasionally but would then go off. It's hit or miss whether these lights come on when you start the vehicle. We took the jeep to Barnes Automotive in Westminster Maryland and they diagnosed that the ABS module (Part 68259556AE) was bad and needed to be replaced. They said they tested it by clearing the error, but then after driving it around town, the error would appear again. They informed me that there is a national shortage of the part and they estimated there is a 90 day backorder. I can't wait 3 months to not drive the vehicle so they let me know just to be aware the vehicle will be ok to drive but to know that it doesn't have ABS if I need to make any sudden stops. Sounds like a very common issue with Jeep Wranglers.

Incident 07/20/2026 · Filed 08/06/2026

I have a C2200 diagnostic code for an internal fault on my ABS module. This is on a national backorder, and the Jeep dealership told me there in no current ETA. Therefore, I have been driving around with no ABS. Sometimes the transmission will surge or bog down causing erratic behaviors on the road which nearly led to me rear ending someone. I worry what will happen if I am ever forced to slam on the brakes in an emergency, but unfortunately, I have no choice but to continue driving it.

Incident 08/04/2026 · Filed 08/04/2026

Abs, brake, and traction control lights on. A jeep dealership was able to discern that the abs module is the cause and that part is on back order for months. In the meantime my vehicle is unfixable even if I were to find a used part from a donor vehicle.

Incident 08/04/2026 · Filed 08/04/2026

The contact owns a 2015 Jeep Wrangler. The contact was informed during a vehicle state inspection of NHTSA Campaign Number: 19V018000 (Air Bags), associated with the VIN; however, the part to do the recall repair was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the recall but informed the contact that parts were not yet available. The manufacturer was made aware of the issue but informed the contact that parts were not yet available. The contact had not experienced a failure.

Incident 07/14/2026 · Filed 08/01/2026

Incident: On the morning of July 14, 2026, (rush hour), I was driving my 2015 Jeep (VIN [XXX]; approximately 28,000 miles) southbound on Interstate 75 toward Miami International Airport. I was traveling at approximately 75 mph when several dashboard warning lights suddenly illuminated: •Brake warning •ABS •Sway bar •Stability control •Transmission The Jeep speed dropped dramatically while the engine rpm increased sharply. The sudden deceleration caused a near pileup among the vehicles behind me, but no collision occurred. Aftermath: After the abrupt slowdown, the speedometer displayed no reading. To protect the engine, I continued operating the Jeep at 3 to 3500 rpm max, and an estimated speed of 20–25 mph. I was able to exit Interstate 75 a few miles from the initial incident and eventually reached Park 'N Fly near MIA Airport. Dealer Findings: Upon trip return on XXX, I took the Jeep to Bomnin Chrysler-Jeep (invoice XXX). The dealer advised me that: •The Jeep's ABS had failed. •The reduced-speed condition was a built-in "protective" feature known as “limp mode.” •The failed ABS module, part number 68259556, is reportedly a common issue in Jeep JK models. •Stellantis no longer manufactures with part. As a result, the Jeep became inoperable for normal use and had to be transported approximately 150 miles from XXX to my residence. Safety Concern and Requested Action: I was fortunate that the road was dry and that no semi-truck was immediately behind me. The passenger vehicles following me were able to react safely, preventing a collision. It is unacceptable that a component directly related to braking and vehicle stability is reportedly prone to failure, discontinued, and that a reliable alternate part does not exist. Given the seriousness of the failure and the sudden loss of speed it caused, I believe ABS module 68259556 should be investigated for a a potential safety recall covering the affected vehicles. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Incident 07/01/2026 · Filed 07/22/2026

The contact owns a 2015 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle failed to accelerate into a higher gear and went into LIMP Mode. The ABS warning light was illuminated on the instrument panel and was also illuminated prior to the failure. The vehicle was driven back to the residence. A few days later, the vehicle operated normally, but the failure recurred after being driven several times. The vehicle was then taken to a dealer, where a technician diagnosed the vehicle's ABS module failure. The contact was informed that the ABS module needed to be replaced. The vehicle was repaired out of pocket. The manufacturer was notified of the failure. The failure mileage was 81,000.

Incident 09/03/2025 · Filed 07/21/2026

About a year ago my dashboard lit-up with a variety of ABS warning lights. My diagnostic module indicated a failure of the ABS module. I paid over $1400 for the part from Mopar and am still waiting with no guaranteed delivery date. Mopar calls the part a "special order," but should be part of the standard parts repair inventory. The braking has become unreliable (or "mushy") with extreme swerving on sudden breaking. Evidently, this is a wide-spread problem being experienced by many Jeep owners. I contend that there should be a safety recall before there is a serious accident or class-action.

Incident 09/01/2025 · Filed 07/14/2026

A variety of warning light came on my display in September 2025 indicating a failure of the anti-lock braking module. I paid $1137.01 with Mopar Genuine Parts only to find that the part is on "universal back order." That was almost a year ago! It doesn't seem "usual and customary" to charge for a part before it is shipped. Also, driving the car in this condition poses a significant safety risk for which there appears to be no resolution. Aftermarket parts are not available or have poor customer reviews.